|
 |
|
| |
|
|
Q: What is the difference between the Super Bright Bore Alignment Tools and the standard?
A: The difference is the diode. The Super Bright Bore Alignment tool comes with a 635 nm Diode that is brighter and easier to see. The standard bore tool comes with a 650nm diode. The difference, at night time, is the 650nm diode is visible at 500 yards and the 635nm is visible at 1,000 yards
Q: Will the bore tools work on pistols as well as rifles?
A: Yes, they will as long as you have a 4 inch barrel and the gun’s caliber is .22-.50 Caliber.
Q: Can you purchase extra adapters?
A: Yes, the cost is $7.00 for all kits with the exception of the Hi-Precision. The cost on the Hi-Precision is $9.00 (due to the brass insert in the bushing).
Q: What is the difference between the Hi-Precision Bore tool and the other Bore tools?
A: The Hi-Precision has several distinct features that make it more accurate. Some of the features are: The shooter can fully calibrate the bore tool to each and every gun. There is a brass taper that is easier on the crown of the barrel and better for repeated use. The Hi-Precision has a stainless steal shaft for increased strength and durability. The Hi-Precision also comes with a plastic case for carrying or storage of your bore tool.
Q: Will the adapters mar the finish of the inside bore?
A: No, we use 100% DuPont ® Delrin material for durability of the adapters and it does not harm or mar the rifling inside your barrel.
Q: What makes the Bore tools accurate?
A: In our testing we found that the last 2 inches of the barrel determine best where the bullet will end up. In addition our bore tool is an all one piece machined aluminum patented design. Our arbors ensure a snug fit inside the barrel and our taper on the tool
make certain the tool is aligned to the bore of the gun. With the patented design, adjustable arbors and the tapered fit this make one of the most accurate bore tools available.
Q: What do the numbers represent on the target card that is supplied with the Bore Tools?
A: The target is supplied for the purposes of sighting in your gun at shorter distances. Compensation needs to be made for the distance between the center of your scope and the center of the bore. For instance if you are sighting-in at less than 50 feet, you will want to measure the height distance between the center of your scope and center of the bore line. What ever the distances is (i.e. 2 inches) you will need to put your laser dot right on the bull’s-eye of the target and adjust your cross-hairs on the 2.00 mark. If your height distance is 1.75, you would adjust your laser dot on the bull’s-eye and your cross hairs on the 1.75
mark above. At 50 feet and greater, put your cross-hairs of your scope right on the laser dot.
Q: Why can’t the .17-.22 Caliber Bore Tool work for .17-caliber to .50 calibers?
A: Due to the very small inside diameter of a .17 caliber we could not make a universal tool and keep the same accuracy. To ensure the customer the most accuracy we created a separate tool for calibers .17-.22.
Q: What is your warranty?
A: One-year against any manufactures defects.
Q: Where is your product produced?
A: Here in the USA.
:: UNIVERSAL RAIL MOUNT ::
BACK TO TOP
Q: What guns other than railed pistols will your rail mounting system work with?
A: This system will also work with any picatinny style, standard weaver base, 3/8th inch dove tail, NATO Rails or Military Specifications 1913 rails.
Q: Will your rail mount system work on all pistols?
A: We found that this new system will work on 97% of all pistols with rails. We discovered a few pistols that our system will not work with and the list is as follows:
Beretta: 87 Target (.22)
Bersa: Thunder Ultra Compact, (.9, .45)
All CZ’s
EAA: Thor Single Shot
S&W: 9GVE (.9, .40)
Springfield: XD 3’ barrel (.9, .357, .40 .45)
STI: IPSC (.9)
Heckler & Koch: Mark 23 (.45)
Q: How does the mount attach?
A: LaserLyte came out with a unique claw-type system that securely attaches to the rail/picatinny/weaver base area.
Q: Does all the hardware come with the systems?
A: Yes, everything you need to attach to the weapon and sight in your laser is supplied.
Q: Are there different switch’s available for the Laser Rail Mounts?
A: Yes there are three different types. The first type is a slide switch that has an ambidextrous on/off button. When you push the button, the laser stays on, and move the switch to the middle location and the power goes off.
• The second option is the pressure switch straight cord. The cord is approximately six inches in length and is pressure activated. Pressing down on the pressure pad area will active the laser dot, and once released the laser dot turns off.
• The third option is a curly cord that is also is pressure pad activated. This is a curly cord material and can be extended out to 10 to 36 inches in length.
Q: What is the difference between the standard Laser and the super bright?
A: The standard Laser has a 500 yard range (5mW output and 650 nm diode). The super bright has a 1,000 yard range, (5mW output and 635 nm diode). This measurement has been determined at night time range.
Q: Can you see the Laser in daylight conditions?
A: There are no red Lasers in a class IIIa that are visible in sunny conditions, however you will be able to see at shorter distances depending on your ambient light conditions. The recommended use for Lasers is dusk to dawn or night-time use.
Q: What types of batteries are supplied with your Lasers?
A: All of our products operate on (3) A-76 batteries which are supplied with each unit. These batteries are common watch/calculator batteries which can be obtained at any camera store or any well known sporting good retail stores.
Q: How long should I expect the Laser to operate on these batteries?
A: Constant on the batteries will last 1.5 hours, which translates to 3 months on intermittent use.
Q: How do your Lasers adjust?
A: The Laser features a two adjustable screws. One screw is for windage and the other screw is for elevation. One would sight the laser in similar to adjusting your scope.
Q: Does my pistol need to have rails?
A: Yes, your pistol needs to have rails for our rail mount. If you do not have rails you can attach an after market picatinny rail (check with your local dealer). The other option is to use LaserLyte’s Universal Trigger Guard mounting system to mount your laser.
:: QUICK DETACHABLE LASERS ::
BACK TO TOP
Q: Do your Quick Detachable Systems work on all pistol rails?
A: No they do not. They are pistol specific. Please refer to the Quick Detachable mounts for the variety of pistols that they accommodate.
Q: Does this mount hold up under heavy recoil?
A: Yes it does. The QD mount utilizes (2) cross locking pins to securely attach the Laser sight to the pistol’s mounting rails. The (2) cross locking pins are operated by (2) buttons, when depressed they release the Laser sight for quick removal. When installing depress the buttons, slide the mount on the mounting rails and release buttons.
Q: How does the Laser adjust?
A: The Laser features a two-screw windage and elevation adjustment for easy zeroing.
Q: Can this mount be fitted to a picatinny style weapon?
A: Yes, in our findings we discovered the S&W mount does work on most of the picatinny style rails.
Q: Do you have dimensions of the mounts?
A: Yes, and they are as follows: all dimensions are in Inches.
Glock/Beretta:
Length: 1.505
Width: 1.12
Depth: 1.38
Inside rail width: .749
This mount also fits the HK P2000
S&W 99 Series:
Length: 1.505
Width: 1.12
Depth: 1.38
Inside rail width: .68
This mount will also fit the Taurus P24/7
:: UNIVERSAL PISTOL LASERS ::
BACK TO TOP
Q: How do the Lasers adjust?
A: Each Pistol Laser features a two-screw windage and elevation adjustment for easy zeroing.
Q: Are the Lasers available in black and stainless?
A: Yes they are.
Q: Are the Lasers available in both standard and super bright?
A: Yes they are. The standard has a 500 yard range at night, and the super bright has a 1,000 yard range at night.
Q: What makes the Pistol Lasers Universal?
A: Each Laser comes complete with 24 pre-shaped polymer inserts to fit virtually all handguns. The remote pressure switch models come with a self-adhesive mounting pad for placement of the switch. You can also remove the pistol mount (the wireless or pressure switch) and using the Shotgun & Rifle Mounting Kit, (please refer to the accessory area) will convert this Pistol Laser to the Universal Shotgun & Rifle Laser System.
Q: How long do the batteries last?
A: Constant on 1.5 hours.
:: UNIVERSAL RIFLE LASER SYSTEM ::
BACK TO TOP
Q: How do you sight in the Universal Rifle Laser System?
A: The Laser features a two-screw windage and elevation adjustment for easy zeroing.
Q: How is the Laser activated?
A: The Laser comes with pressure switch curly cord that extends to 10 to 36 inches.
Q: What makes this system Universal?
A: The systems include (2) sets of clamps, which allow the mounting of the Laser to any 1⁄2 to 1 inch barrel or magazine tube.
Q: Is this system available in the standard and the super bright?
A: Yes they are. The standard has a 500 yard range and the super bright has 1,000 yard range at night.
:: BOW LASER SYSTEM ::
BACK TO TOP
Q: Are the Bow Mounting Systems legal to hunt in my State?
A: There are many states where there are restrictions. We recommend checking with your local authorities.
Q: Where do you mount the Bow Mounting System?
A: This simply mounts to the stabilizer portion of the bow. The mounts will accommodate ½ inch to 1 inch in diameter.
Q: How do you sight in the Bow Laser System?
A: The Laser is easily adjusted for arrow impact at a specific yardage with the windage and elevation adjustment screws.
Q: What activates the Laser dot?
A: The Laser comes with a remote pressure switch attached to a 6-inch straight cord. This allows the placement of the switch to the grip area of the riser for easy activation.
Q: Are the Lasers available in both standard and super bright?
A: Yes they are. The standard has a 500 yard range and the super bright has 1,000 yard range at night.
:: ACCESSORY LINE ::
BACK TO TOP
Q: Who can I purchase the batteries through?
A: All of our product line operates on (3) A-76 batteries which are also know as LR-44 or AG13. These batteries can be purchased through any camera, sporting goods or retail outlets.
Q: What is the shelf life on the batteries?
A: Approximately 1 ½ years.
Q: Can you see the Laser dot using the Daylight Laser Target?
A: Yes you can. The Daylight Laser Target is made from a special reflective material that allows you to see the Laser dot even in direct bright sunlight. The target also has an adhesive back that allows it to be applied to a hard fixed surface.
Q: How far can you see the Laser dot, using the Daylight Laser Target?
A: Due to the reflective material, you are able to see the dot up to .5 mile in sunny conditions.
Q: What is the purpose of the nylon bushing with the Shotgun & Rifle Mounting Kit?
A: The purpose of this bushing is to insulate and protect the Laser body from any excessive heat that may occur under rapid firing of the weapon. Also it secures the Laser body in the mounting device for a snug fit.
Q: Will the 12 to 20 gauge adapter work on all the Bore Alignment Kits?
A: They will work on all the kits with the exception of the .17-.22 Caliber Bore Alignment Kit.
|
|
|
|
|
|
 |
