Q: What firearms will the CM-GAR fit on?
A: Compatible with all firearms with at least four inches of Picatinny rail system.
Q: How do I install the CM-GAR?
A: The CM-GAR laser is easily mounted on four inches or longer Picatinny rail and secured with a crossbar screw.
Q: How do I sight in the laser?
A: There are two adjustment screws located on the laser. The elevation adjustment screw is on bottom of the laser; the windage adjustment screw is on the right side of the laser.
Q: What size hex wrench do the adjustment screws use?
A: The adjustment screws use a .035 hex wrench. If you lose yours and cannot find one please contact Customer Service via email at firstname.lastname@example.org, and we will send you a new one.
Q: Does the CM-GAR have a pulse mode?
A: No, this laser does not have a pulse mode.
Q: What kind of batteries and how many does the CM-GAR use?
A: The CM-GAR uses three batteries, size 357.
Q: How long do the batteries last?
A: The battery life for normal usage is 2.5 hours in the constant on mode and 5 hours in the momentary mode.
Q: Where can I purchase replacement batteries for my CM-GAR?
A: The 357 batteries are standard camera/watch/hearing aid batteries that can be purchased at your local Wal-Mart, Radio Shack, local drug store or any other place that sells watch or hearing aid batteries.
Q: What is the actual size of the CM-GAR?
A: 3.85 (Length) x 1.13 (Width) x 0.95 (Height) inches.
Q: How much does the CM-GAR weigh?
A: This laser weighs 1.76 oz (with batteries installed)