Q: What firearms is the LT-40 compatible with?
A: Compatible with all firearms chambered in .40 S&W.
Q: Will the LT-40 fit any additional calibers?
A: The LT-40 is compatible with .40 S&W firearms only. However the LT-PRE (found here): http://www.laserlyte.com/products/trainer-pistol-pre will fit firearms chambered in 9mm, 40S&W, 45 ACP, 38 special, .380 Auto, 357 Sig, 10 mm and 45 LC as long as you have a minimum of a 2 inch barrel.
Q: How do I install the LT-40?
A: The LT-40 installs into the firing chamber in seconds, works regardless of barrel length and does not stick out of the barrel.
Q: How do I sight in the laser?
A: The LT-40 is factory sighted and no adjustment is available on the laser.
Q: Do I need to use snap caps with the LT-40?
A: No snap cap is needed, as the Laser Trainer Cartridge acts as a snap cap to protect your firing pin from dry fire.
Q: My LT-40 will not fit into the chamber of my firearm. What should I do?
A: The Laser Trainer Cartridges are designed to fit snugly into the chamber of your firearm and may require force to insert. We recommend making certain the chamber is clean as even a small amount of residue can make installing the laser difficult. You may lubricate the o-rings using a VERY SMALL amount of petroleum jelly or gun oil to assist in seating the laser into your chamber. Applying a small amount of petroleum jelly based product will also aid in a longer service life. Do not be afraid of damaging the laser as this is part of the design. If at any point you feel you may damage the firearm STOP. If these tips do not resolve the issue please contact our Customer Service team via email at firstname.lastname@example.org for further assistance.
Q: The black o-rings on my LT-40 are torn/worn/lost, how can I replace them?
A: The LT-40 o-ring is available for purchase here: https://www.laserlyte.com/products/lt-o-ring. Once the replacement is received you may lubricate the o-ring using a very small amount of petroleum jelly or gun oil, this will aid in a longer service life.
Q: What kind of batteries and how many does the LT-40 use?
A: The LT-40 uses three batteries, size 377.
Q: How long do the batteries last?
A: The battery life is 3,000 shots.
Q: Where can I purchase replacement batteries for my LT-40?
A: The 377 batteries are standard camera/watch/hearing aid batteries that can be purchased at your local Wal-Mart, Radio Shack, local drug store or any other place that sells watch or hearing aid batteries. You may also purchase 12 packs of replacement batteries directly from LaserLyte here: http://www.laserlyte.com/products/12-pack-of-377-batteries
Q: What is the actual size of the LT-40?
A: 0.39 (Minimum Diameter) x 0.42 (Maximum Diameter) x 1.36 (Length) inches.
Q: How much does the LT-40 weigh?
A: This laser weighs .50 oz.