FAQ: RL-1 

Q: How do I install the RL-1?

A: Once the stock rear sight is removed, the laser installs into the dovetails with a brass punch that comes with the laser. If you are unfamiliar with removing stock rear sights, we suggest consulting either Glock, your gun manual or taking the firearm to a certified gunsmith.

Q: How do I sight in the laser?

A: There are two screws located on the laser. One is on the top of the laser and is for elevation adjustment; the one on the right side of the laser is for windage adjustment.

Q: What do I do if I’m having trouble sighting the laser in?

A: Try the reset process; back the screws out for both the elevation and windage until there is a thread or two showing on each screw. Then let the laser sit turned off for about a half hour to an hour so that it resets. We suggest making small adjustments and working between the two screws until the laser’s dot sits on top of the front sight. You will need to make your final adjustments at the range and make sure your last adjustment is clockwise.

Q: What size Hex wrench do the adjustment screws use?

A: The adjustment screws use a .035 Hex wrench. If you lose yours and cannot find one please contact customer service at 928-649-3201, and we will send you a new one.

Q: Will the RL-1 withstand recoil?

A: Yes, the RL-1 has been thoroughly tested to withstand recoil, and demonstrations of the laser’s durability can be found on the product information page. http://www.youtube.com/watch?v=xae41-o8ukU

Q: Does the RL-1 have a pulse mode, or low battery indicator?

A: Yes, this laser does have a pulse mode but not a low battery indicator.

Q: What firearms will the RL-1 fit on?

A: All Glock models

Q: How does the RL-1 attach to the firearm?

A: The laser replaces the stock rear sights and fits in the existing dovetails.

Q: Are there fixed sights for when the laser is not in use? Are they night sights?

A: There are fixed sights available but no night sights.

Q: How much does the RL-1 weigh?

A: This laser weighs 1.2 oz.

Q: Why is the grey activation switch/button on the left hand side of the laser?

A: The activation switch/button is located on the left, back side of the RL-1 due to design and size. Also, research findings have shown that the majority would prefer the button to be on the left hand side so they may use their free hand to activate the laser.

Q: What kind of batteries and how many of does the RL-1 use?

A: The RL-1 uses four batteries size 377.

Q: How long do the batteries last?

A: The battery life for normal usage is 5 hours in the constant on mode and 10 hours in the pulse mode.

Q: Where can I purchase replacement batteries for my RL-1?

A: The 377 batteries are standard camera/watch/hearing aid batteries that can be purchased at your local Wal-Mart, Radio Shack, local drug store or any other place that sells watch or hearing aid batteries. You may also purchase 12 packs of replacement batteries from LaserLyte directly.

Q: What is the actual size of the RL-1?

A: 0.85 x 1.05 x 0.35

Subscribe to back in stock notification